2017 Connecting Sensors

Connecting Sensors

  • Temp/Humidity sensor:
    • wiring:Connect_temphum_sensor
      • Purple= DATA (nearest “S”, left-most pin) -> D7 “D”
      • Blue= VDD (middle pin) -> D7 “V”
      • Green = GND (nearest “-“, right-most pin) -> D7 G”
  • Distance Sensor:
    • wiring:Connect_distance_sensor
      • Red = TRIG -> D5 “D”
      • Brown = VCC -> D5 “V”
      • Yellow = GND -> D5 “G”
      • Orange = ECHO -> D6 “D”
  • Servo:
    • Wiring:
      • Brown = D8 “G” (- Ground)
      • Red = D8 “V” (+ Voltage)
      • Orange = D8 “D” (Signal)